Brass Oval Bullet Lock
Silver Oval Bullet Lock
Round Head Bullet Lock
Bayonet Bullet Lock
£31.00 per pair
|
Accessories And Parts - Main Page All
Prices Exclude VAT
|
|
|
|
|
|
Brass Oval Bullet Lock |
Silver Oval Bullet Lock |
Round Head Bullet Lock |
Bayonet Bullet Lock |
|
|
|
|
|
|
£31.00 per pair |
£31.00 per pair | £37.00 per pair | £37.00 per pair |
| Brass Oval bullet Lock with anti-drill inserts and hardened steel. 2 numbered keys per lock. Available keyed alike in pairs or groups. | Silver Oval bullet Lock with anti-drill inserts and hardened steel. 2 numbered keys per lock. Available keyed alike in pairs or groups. | Round Head bullet Lock chrome plated with anti-drill inserts and hardened steel. 2 numbered keys per lock. Available keyed alike in pairs or groups. | Bayonet bullet Lock chrome plated with anti-drill inserts and hardened steel. 2 numbered keys per lock. Available keyed alike in pairs or groups. |
| Code: ARR571SH | Code: ARR572A | Code: ARR573SH | Code: ARR970SH |
| Bottom Rail Centre Lock | Lath/Slat Centre Lock | Bottom Rail Centre Lock/RH | Bottom Rail Centre Lock/LH |
|
|
|
|
|
| £21.00 each | £21.00 each | £21.00 each | £21.00 each |
| Zink plated steel bottom rail shutter lock with brass cylinder. Keyed both sides for internal or external operation. left and right locking bolts with 23mm throw. 2 numbered keys per lock. available keyed to differ or keyed alike. | Zink plated steel narrow shutter lock with brass cylinder. Keyed both sides for internal or external operation. left and right locking bolts with 30mm throw. 2 numbered keys per lock. available keyed to differ or keyed alike. | Zink plated steel bottom rail shutter lock with brass cylinder. Keyed both sides for internal or external operation. Right locking bolt with 23mm throw. 2 numbered keys per lock. available keyed to differ or keyed alike. | Zink plated steel bottom rail shutter lock with brass cylinder. Keyed both sides for internal or external operation. Left locking bolt with 23mm throw. 2 numbered keys per lock. available keyed to differ or keyed alike. |
| Code: ARR575SH | Code: ARR574SH | Code: ARR974RSH | Code: ARR975LSH |
| Ground Lock | Ground Anchor Unit | Bullet Lock Housings (A) | Bullet Lock Housings (B) |
|
|
|
|
|
| £21.00 each | £29.00 each | £2.50 Per Pair | £2.50 Per Pair |
| Heavy-duty hardened steel pad lock for use with ground anchor unit. Brass case with case-hardened steel turning lock bolt. Plug protected by a steel escutcheon. Supplied with three keys | The Brass tapered socket is inserted in the floor avoiding any obstruction. Provided with a detachable shackle. The Other shackle is attached to shutters bottom rail ready for a secured pad-lock. | Bullet Lock housings used with Brass Oval bullet lock. (Code: ARR571SH) Nickel plated welded to steel guide rails to receive bullet lock inserts. | Bullet Lock housings used with Round Head or Bayonet bullet lock. (Code: ARR573SH & Code: ARR970SH) machined from 40mm diameter mild steel bar with a chemical black rust proofing. |
| Code: ARR576SH | Code: ARR577SH | Code: ARR578SH | Code: ARR978SH |
|
|
|
Key Switch Surface-Mounted |
Key Switch Flush-Mounted |
Single Pole
Switch |
Key Switch Security Housing |
 |
 |
 |
 |
|
£45.00 each |
£49.00 each | £21.00 each | £45.00 each |
| Surface-mounted Key-Switch control device unit to operate electric roller shutters. Switches are on hold to run for safety. Supplied with 3 numbered keys per unit, available keyed to differ or keyed alike. | Key-Switch with flush-mounted face plate. Control device unit to operate electric roller shutters. Switches are on hold to run for safety. Supplied with 3 numbered keys per unit, available keyed to differ or keyed alike. | Single Pole Switch surface mounted or Flush mounted for Internal use to operate electric roller shutters. Supplied with surface mounted back box or flush mount box. | Pad-lockable metal housing for a surface mounted key switch (Code: ARR530E)Supplied in galvanised finish. (pad-lock not included) |
| Code: ARR530E | Code: ARR531E | Code: ARR533SW | Code: ARR801NV |
| Group Command For 4 Shutters | Remote Receiver Unit | Remote
Receiver
Unit (Includes 2 Transmitters) |
Multi-Channel Remote Receiver Unit |
 |
 |
 |
 |
| £125.00 each | £105.00 each | £91.00 each | £169.00 each |
| When shutters need to be operated in groups or individually. Allows up to four shutters to operate simultaneously from one switch. | Remote Receiver with bulk head light. Fitted internally it enables shutters to be operated remotely. Requires (Code: ARR535SW) Remote Control Transmitters. | Remote Receiver unit. Fitted internally it enables shutters to be operated remotely. This unit includes 2 x (Code: ARR538E) Remote Control Transmitters. | Multi-Channel Remote Receiver with bulk head light. Fitted internally it enables up to four shutters to be operated simultaneously from one hand-held transmitter. Includes 1 x (Code: ARR540SW) Multi-Channel Remote Transmitter. |
| Code: ARR558E | Code: ARR537SW | Code: ARR559E | Code: ARR536SW |
| Remote-Control Transmitter (A) | Remote-Control Transmitter (SW) | Remote-Control Transmitter (E) | Multi-Channel Remote Control Transmitter |
 |
 |
 |
 |
| £55.00 each | £55.00 each | £45.00 each | £55.00 each |
| Hand - held Remote Control Transmitter single channel unit operator for use with Remote Receiver Units. | Hand - held Remote Control Transmitter single channel unit operator for use with (Code: ARR537SW) Remote Receiver Units. | Hand - held Remote Control Transmitter single channel unit operator for use with (Code: ARR559E) Remote Receiver Units | Hand - held Multi-Channel Remote Control Transmitter unit operator for use with (Code: ARR536SW) Multi-Channel Remote Receiver Units. |
| Code: ARR539A | Code: ARR535SW | Code: ARR538E | Code: ARR540SW |
| Remote Control key Pad | Manual Override Crank Handle | Electric Motor Rigid Eye | Battery Back Up |
 |
 |
 |
 |
| £123.00 each | £36.00 each | £18.00 each | £169.00 (350 VA Unit) |
| Remote Control wireless Key pad. This unit operates one door only. | Manual Override turning crank handle. Used as a way of manually operating motorised shutters in an emergency. | Electric Motor Rigid Eye Override eye outlet for motorised shutters. | Opens and closes electric shutters in the event of power failure. Unit can be set to provide back up for 31 or 100 days. Minimum of 8 complete open and close shutter cycles in standby mode. Energy saving sleep mode. |
| Code: ARR569SW | Code: ARR542E | Code: ARR543E | Code: ARR701SW |
| MOTORS |
| Electric Tube Motor (11/12) | Override Tube Motor (11/12) | Electric Tube Motor (15/18) | Override Tube Motor (15/18) |
 |
 |
 |
 |
| £183.00 each | £218.00 each | £276.00 each | £296.00 each |
| Electric tube motor (11/12) supplied with mounting bracket and adaptors. Will lift a standard shutter size of 4.5m wide x 3m high. All motors are supplied with a 2.5 metre long cable as standard. | Electric tube motor (11/12) with manual override. Supplied with mounting bracket and adaptors. Will lift a standard shutter size of 4.5m wide x 3m high. All motors are supplied with a 2.5 metre long cable as standard. | Electric tube motor (15/18) supplied with mounting bracket and adaptors. Will lift a standard shutter size of 5.5m wide x 3m high. All motors are supplied with a 2.5 metre long cable as standard. | Electric tube motor (15/18) with manual override. Supplied with mounting bracket and adaptors. Will lift a standard shutter size of 5.5m wide x 3m high. All motors are supplied with a 2.5 metre long cable as standard. |
| Code: ARR588E | Code: ARR589E | Code: ARR594E | Code: ARR595E |
| END-LOCKS |
| Nylon End Locks | Steel End Locks | 50mm Nylon End Locks | CD150 Nylon End Locks |
 |
 |
 |
 |
| £0.36 Pair | £0.36 Pair | £0.54 Pair | £0.54 Pair |
| Nylon End-Locks fitted to each end of Shutter slats. Used with 75mm galvanised steel solid or perforated slats (Code: ARR593PK) Left and right handed profiles. Includes fixing rivets. | Steel End-Locks fitted to each end of Shutter slats. Used with 75mm galvanised steel solid or perforated slats (Code: ARR593PK) Left and right handed profiles. Includes fixing rivets | 50mm Nylon End-Locks fitted to each end of Shutter slats. Used with 50mm aluminium shutter slats. Includes fixing rivets | CD150 Nylon End-lock fitted two per slat, every other slat. Slats are crimped to hold the end-lock in place. For on site repairs the end-locks can be riveted in place using 4 x 6 rivets. |
| Code: ARR599AS | Code: ARR599AL | Code: ARR599V | Code: ARR599SW |
| BELTS & WINDERS |
| Belt Cord | Swivel Belt Winder | Geared Belt Winder | Belt Roller |
 |
 |
|
 |
| £5.00 per metre | £25.00 each | £33.00 each | £5.00 each |
| 14mm Grey Belt Cord for raising and lowering domestic home security shutters. |
Swivel Belt winder unit for
raising and lowering domestic home security shutters. (Belt Cord Not included) |
Geared
Belt winder unit for
raising and lowering domestic home security shutters. (Belt Cord and handle Not included) |
Belt roller used with 14mm Grey Belt Cord (Code: AAR564SW) to guide belt threw wall. |
| Code: ARR564SW | Code: ARR602SW | Code: ARR603SW | Code: ARR702SW |
| RUBBER & BRUSH SEALING |
| Bottom Rail Rubber Seal | 'D' Section Bottom Rubber Seal | Guide Rail Brush Seal | Rubber Seal with metal Carrier |
 |
 |
 |
 |
| £15.00 per linear metre | £15.00 per 3 metre Length | £23.00 for 3 metre length | £23.00 per 3 metre Length |
| Clip on Bottom Rail T-section rubber seal. No mechanical fixings required. Minimum order 4 metres. | ' D ' section seal with heavy duty double sided tape an alternative seal for roller shutter doors. Minimum order 3 metres. | Clip on PVC carrier with brush insert-no mechanical fixings. Helps prevents draughts, door vibration etc. Available in 3 metre lengths | Slide in rubber bottom rail seal with metal fixing carrier track. Minimum order 3 metres. |
| Code: ARR590F | Code: ARR980F | Code: ARR921F | Code: ARR954F |
|
|
| Brush Strip Sealing System | 1800 Fixing Carrier for brush Strip | 900 Fixing Carrier for brush Strip | 450 Fixing Carrier for brush Strip |
 |
 |
 |
 |
| £28.00 per linear metre | F.O.C with Brush Strip | F.O.C with Brush Strip | F.O.C with Brush Strip |
| Brush strip seal Nylon hard wearing bristles. available in 6 section sizes: 1" , 2" , 3" , 4" , 5" and 6" Minimum order 3 metres. Includes fixing carrier. | Fixing carrier 1800 mill finish extruded aluminium flanges for brush strip. Supplied free of charge with Brush Strip Sealing System. (Code: ARR999F) minimum order 3 Metres | Fixing carrier 900 mill finish extruded aluminium flanges for brush strip. Supplied free of charge with Brush Strip Sealing System. (Code: ARR999F) minimum order 3 Metres | Fixing carrier 450 mill finish extruded aluminium flanges for brush strip. Supplied free of charge with Brush Strip Sealing System. (Code: ARR999F) minimum order 3 Metres |
| Code: ARR999F | Code: ARR180F | Code: ARR90F | Code: ARR45F |
| POLE HOOKS, CHAINS & HANDLES |
| Pole Hook | Lifting Handles | Hand Chain | Hand Chain Locking Keep |
 |
 |
 |
 |
| £18.00 each | £5.00 each | £5.75 per metre | £8.75 each |
| Pole hook complete with pole. For pulling down manual spring loaded shutters. Simply hooks on the shutters bottom rail section enabling the shutter to be pulled down. | Easy lifting shutter Handle used for raising manual spring loaded shutters. The handle is fixed to 75mm galvanised steel shutter slats fixing bolts and nuts supplied. | Galvanised steel hand chain for industrial chain operated roller shutter doors. Hand chain size: 5.5mm | Hand Chain Locking Keep, Pad-lockable. Holds the chain in place to secure the roller shutter door. (pad-lock not included) |
| Code: ARR597NV | Code: ARR600NV | Code: ARR802NV | Code: ARR803NV |
| SHOOT BOLTS, PAINTS & COVER CAPS |
| Lockable Shoot Bolt | Shoot Bolt Receiver | Touch-up Paint Pots | Cover Caps |
 |
 |
 |
 |
| £30.00 each | £9.60 each | £10.00 each | £20.00 Per hundred |
| Lockable shoot bolt, used in conjunction with bar top recess. (Code ARR599JB) The Shoot Bolt is attached to the shutters removable guide rail post. The bolt sinks into the bar top and secures the removable guide rail post. | Spring-loaded Shoot Bolt Receiver, fixed/recessed into bar counter top. Used in conjunction with Lockable Shoot Bolt (Code ARR598JB) | For repairing minor blemishes touch -up paint pots are available in our standard RAL or BS colour range. White, Brown, Green, Black, Grey, Cream, Red and Blue. | 13mm plastic cover caps are available to cover holes drilled for face fixing of roller shutter guide rails. Colours available: White, Brown, Green, Black, Grey, Cream, Red and Blue. |
| Code: ARR598JB | Code: ARR599JB | Code: ARR567SW | Code: ARR568SW |
| SHUTTER SLATS |
| Galvanised Steel Solid Slat | Galvanised Steel Perforated Slat | Aluminium Foam-Filled Slat | Punched Vision Slats |
 |
 |
 |
 |
| £1.50 per linear metre | £2.25 Per linear metre | £9.00 Per Linear Metre | £10.50 Per Linear Metre |
| 75mm Standard 22 gauge, galvanised steel roller shutter solid slats. (Code: ARR599AS)are the Nylon End locks required for these slats. | 75mm Standard 22 gauge, galvanised Perforated steel roller shutter slat. (Code: ARR599AS)are the Nylon End locks required for these slats. | Roller Garage Door Insulated, powder-coated, foam-filled, aluminium slats. Colours available: Colours available: Burgundy, Brown, White, Light Beige, Fir Green, Navy Blue, Black, Anthracite Yellow, Light Grey, Silver Metallic, and Medium Oak Woodgrain, (Textured Woodgrain finishes: Mahogany, Golden Oak or Rosewood.) | Roller Garage Door Punched and glazed vision slats. (not available foam-filed) Colours available: Burgundy, Brown, White, Light Beige, Fir Green, Navy Blue, Black, Anthracite Yellow, Light Grey, Silver Metallic, and Medium Oak Woodgrain, (Textured Woodgrain finishes: Mahogany, Golden Oak or Rosewood.) |
| Code: ARR593AL | Code: ARR594AL | Code: ARR551SW | Code: ARR549SW |
| FASCIA & HOODS |
| Canopy Box Galvanised | Canopy Fascia Galvanised | Canopy Box Powder Coated | Canopy Fascia Powder Coated |
|
|
|
 |
|
| £24.00 per linear metre | £20.00 per linear metre | £25.00 per linear metre | £25.00 per linear metre |
| Galvanised steel shutter enclosure box. Used to enclose the shutters barrel mechanism. | Galvanised steel shutter front fascia. Used to enclose the front of the shutters mechanism. | Powder coated Standard RAL or BS colour cover box enclosure. Used to enclose the shutters barrel mechanism. | Powder coated Standard RAL or BS colour shutter front facia. Used to enclose the front of the shutters mechanism. |
| Code: ARR597P | Code: ARR598P | Code: ARR546SW | Code: ARR547SW |
| GUIDE RAILS & BOTTOM RAILS |
| 50mm Galvanised Steel Guide | 65mm Galvanised Steel Guide | Bottom L-Rail Section | Bottom T-Rail Section |
 |
 |
 |
 |
| £6.00 per linear metre | £7.50 per linear metre | £7.00 per linear metre | £9.00 per linear metre |
| 50mm wide x 32mm deep Galvanised Steel Roller Shutter Guide runner rail. | 65mm wide x 32mm deep Galvanised Steel Roller Shutter Guide runner rail. | Bottom rail L-section. 88mm high x 31mm wide. | Galvanised Bottom rail T-section. 69mm high x 74mm wide |
| Code: ARR584AL | Code: ARR585AL | Code: ARR588AL | Code: ARR587AL |
| BOX SECTION & ANGLE |
| 50mm x 50mm, Box Section | 50mm x 20mm Box Section | 30mm x 20mm, x 3mm & Angle | |
 |
|
 |
|
| £12.00 per linear metre | £12.00 per linear metre | £11.00 per linear metre | |
| Aluminium 50mm x 50mm x 3mm Powder-coated packing box section used to pack shutters of the wall to miss door handles ect. Stock colours. White or Brown. | Aluminium 50mm x 20mm x 3mm Powder-coated packing box section used to pack shutters of the wall to miss door handles ect. Stock colours. White or Brown. | Aluminium 30mm x 20mm x 3mm Powder-coated angle. Utilised as either cill angle or a closure angle. Stock colours. White or Brown. | |
| Code: ARR781SW | Code: ARR782SW | Code: ARR569SW |
| TUBE & DUMMY END |
| Roller Tube | Dummy End Unit | ||
 |
 |
||
| £11.50 per linear metre | £13.50 each | ||
| 4" Mild steel roller tube/barrel. Shutter spring system or motor system assembly installed internally. | 4” steel tube/barrel block dummy end unit, complete with U-cup. Fits inside one end of Roller Tube. | ||
| Code: ARR589AL | Code: ARR596NV |
|
Arrow Security Shutters Limited is a full member of the Door & Hardware Federation (DHF), incorporating the Door & Shutter Manufacturers Association (DSMA) and the Association of Building Hardware Manufacturers (ABHM) |
|
Directors: A.B. Burke, J.L. Burke Registered in England No. 4156177 VAT Registration Number: 598 2227 05 |
