FACE FIXING
SHUTTERS:
Shutter Width
Measure the brick opening width (top, middle and bottom) as
indicated by the arrows. From each edge of this opening width 53mm of
shutter guide rail is required on each side. (this is the full shutter width, overall guide width)
Shutter Height
Measure the height from floor level or cill level to underside of brick
opening height. This is the guide height, add the
shutters box size, headroom. (This is the shutters Total height.) The box,
headroom is dependent upon the height of the
shutter- see (shutter door box sizes below) for required sizes. When the door is fully raised, a
minimum of 55mm bottom slat hangs down into the guide rails. This is the
shutter opening height (see drawing
below)
REVEAL FIXING SHUTTERS:
Shutter Width
Measure the brick reveal opening width (top, middle and bottom)
as indicated by the arrows. 53mm guide rails on each side are inclusive of the
reveal opening width, (this is the full shutter width, overall guide width)
Shutter Height
Measure the height
from floor level or cill level to underside of brick opening height. If the shutter
is installed within the recess, the height of the shutter box will be
included in the shutter height. (This is the full shutter total height) When the door is fully raised, a
minimum of 55mm bottom slat hangs down into the guide rails. (see drawings
below)
Installation:
The shutters can be fitted
to the wall, window or door frame of the property. The shutters can also
be installed inside the property.
Ensure that the shutter cannot catch on anything that protrudes past the brick-line (i.e.
door handles)? Packers may be required to avoid this.
