Industrial Doors - How To Measure

Industrial Doors - How To Measure

If You Require Any Further Information Or Would Like To Place An Order, Please Telephone 0800 633 5736

All Prices Are Exclusive Of VAT And Installation. We Offer FREE DELIVERY Throughout Mainland UK.
If Required, We Can Install The Doors For You.

EASY-TO-FIT INDUSTRIAL DOOR SHUTTERS

Measuring Instructions

The shutters may be installed either inside or outside the property. (chain operated internally fitted only) The shutters are installed upon the face of the opening or the recess of the opening. If the shutter is installed within the recess, the height of the shutter box will be included in the shutter height. When the door is fully raised, a minimum of 55mm bottom slat should hang down into the guide rails.

The guide rails on each side of the shutter are 65mm wide. (It is recommended that from each edge of the opening width the guides and angles are set on 75mm.)The box is dependent upon the height of the shutter - see (shutter door box sizes below) for required sizes. For face fitting, the guide rails are added to the opening width; for recess fitting, the guide rails are inclusive of the opening width.

Manual operated shutter (measure the brick opening width and the overall opening height as per diagram below.)

Electric operated shutter (measure the brick opening width and the overall opening height as per diagram below.)

Shutter Door Box sizes: Galvanised solid or Perforated (maximum shutter height including box for each box size)

Shutters up to 1200mm high

Shutters up to 2400mm high

Shutters up to 3400mm high

Chain operated shutter (measure the brick opening width and the overall opening height as per diagram below.)

Shutter Door Box sizes: Galvanised solid or Perforated (maximum shutter height including box for each box size)

Shutters up to 2730mm high

Shutters up to 3626mm high

Shutters up to 5000mm high

Arrow Security Shutters Limited is a full member of the Door & Hardware Federation (DHF), incorporating the Door & Shutter Manufacturers Association (DSMA) and the Association of Building Hardware Manufacturers (ABHM)

sales@arrowsecurityshutters.co.uk www.arrowsecurityshutters.co.uk

London: 020 7495 7977 ¨ Glasgow: 0141 332 3373 ¨ Birmingham: 0121 666 7477 ¨ Manchester: 0161 652 1007 ¨ Bradford: 01274 733 433 ¨ Stoke-on-Trent: 01782 287 727 ¨ Preston: 01772 882 788 ¨ Blackburn: 01254 677 990 ¨ Leeds: 0113 246 8655 ¨ Huddersfield: 01484 422 388 ¨ Lancaster: 01524 380 680 ¨ Bolton: 01204 695736

Directors: A.B. Burke, J.L. Burke Registered in England No. 4156177 VAT Registration Number: 598 2227 05